Delta 36-070 User Manual

12
1. Your miter saw has the capacity to cut standard 2 x
4’s laying flat or on edge, at the 45 degree right and left
miter angles as shown in Figs. 26 and 27.
2. A standard 2 x 6 can easily be cut in the 90 degree
straight cut-off position in one pass, as shown in Fig. 28.
3. Cutting a standard 4 x 4 is easily accomplished with
your miter saw in one pass, as shown in Fig. 29.
Fig. 26
Fig. 27
Fig. 28
Fig. 29
GENERAL CUTTING OPERATIONS

Delta 36-070 Specifications

General

Brand	Delta
Model	36-070
Category	Saw
Language	English