>50cm
>50cm
>30cm>30cm >30cm
• The location and hardware should be a solid surface or a firm holder
that suitable for the weight of inverter.
• Suggested to install the inverter to the location which offers free and
safe access. It would streamline the service and maintenance
• Please leave an appropriate gap in between when installing singe/
several solar inverter systems.
• Please install solar inverter at an eye level to allow easy observation for
operation and parameter setting.
• Ambient temperature -20°C~60°C.(power derating above 40°C)
CAUTION !
There shall be sufficient space for product operation as shown as the
Figure 4-4. If necessary, installer can increase the gap space for sufficient
operation space.
Figure 4-4 : Proper installation gap
21
Installation
To Next Page
Loading...
Need help?
General
