Denon AVR-1905 User Manual

Setting the Digital In Assignment
• This setting assigns the digital input jacks of the AVR-1905/785 for the different input sources.
1
2
Select the digital input jack to be assigned to the input source.
•To select the digital input jack
•To select the input source
Select “OFF” if nothing is connected.
18 COAX CD
NOTE:
• TUNER and V. AUX cannot be selected.
3
Press the ENTER or (down) button to enter the setting and switch the Video Input Mode setting.
NOTES:
• When you adjust the channel levels while in the TEST TONE mode, the channel level adjustments made will affect all surround modes.
Consider this mode a Master Channel Level adjustment mode.
•You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND),
5/7 CH STEREO, MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MATRIX and VIRTUAL.
26
ENGLISH

Denon AVR-1905 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	80 W
Product color	Black
Audio decoders	DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital EX, Dolby Pro Logic IIx
Digital Signal Processing (DSP)	Yes
HDMI in	0
Composite video in	4
Digital audio coaxial in	1
Component video (YPbPr/YCbCr) in	3
S-Video outputs quantity	2
Ethernet LAN	No
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
AC input voltage	120 V
AC input frequency	60 Hz

Weight and Dimensions

Depth	171 mm
Width	434 mm
Height	416 mm
Weight	11900 g