EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-1905

Denon AVR-1905 User Manual

Denon AVR-1905
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
19
SPECIFICATIONS
2 Audio section
Power amplifier
Rated output: Front: 80 W + 80 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
115 W + 115 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Center: 80 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
115 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Surround: 80 W + 80 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
115 W + 115 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Surround Back: 80 W + 80 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
115 W + 115 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Output terminals: Front: A or B 16 ~ 16 /ohms
A+B 12 ~ 16 /ohms
Center, Surround, Surr.Back: 16 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N: 98 dB (IHF-A weighted) (DIRECT mode)
Distortion: 0.008% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
2 Video section
Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
S-video jacks
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
C (color) signal — 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
Color component video jacks
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
PB/CB
(blue) signal — 0.7 Vp-p, 75 /ohms
P
R/CR (red) signal — 0.7Vp-p, 75 /ohms
Frequency response: DC ~ 100 MHz — 0, –3 dB
2 Tuner section
[FM] (note: µV at 75 /ohms, 0 dBf=1 x 10
–15
W) [AM]
Receiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB (IHF-A weighted)
STEREO 72 dB (IHF-A weighted)
Total Harmonic Distortion (at 1 kHz): MONO 0.15% (1kHz)
STEREO 0.3% (1kHz)
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 5.0 A
1 W Max. (Standby)
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm (17-3/32” x 5-25/32” x 16-27/64”)
Mass: 11.4 kg (25 lbs 2 oz)
2 Remote control unit (RC-978)
Batteries: R6P/AA Type (three batteries)
External dimensions: 55 (W) x 225 (H) x 34.5 (D) mm (2-11/64” x 8-55/64” x 1-9/64”)
Mass: 165 g (Approx. 5.8 oz) (including batteries)
*
For purposes of improvement, specifications and design are subject to change without notice.
70
ENGLISH

Other manuals for Denon AVR-1905

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1905 and is the answer not in the manual?

Denon AVR-1905 Specifications

General IconGeneral
Speakers connectivity type-
Receiver typeSurround
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)110 W
Power output per channel (20-20KHz@8 Ohm)80 W
Product colorBlack
Audio decodersDTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital EX, Dolby Pro Logic IIx
Digital Signal Processing (DSP)Yes
HDMI in0
Composite video in4
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in3
S-Video outputs quantity2
Ethernet LANNo
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
AC input voltage120 V
AC input frequency60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth171 mm
Width434 mm
Height416 mm
Weight11900 g

Related product manuals