Preset stations
1
Press the MEMORY button.
2
Press the SHIFT button and select the desired memory block
(A to G).
(Main unit) (Remote control unit)
3
Press the PRESET • (+) or ª (–) button to select the desired
preset channel (1 to 8).
(Main unit) (Remote control unit)
4
Press the MEMORY button again to
store the station in the preset memory.
To preset other channels, repeat steps 1 to 4.
A total of 56 broadcast stations can be preset –8 stations (channels
1 to 8) in each of blocks A to G.
1, 4
3
2
Preparations:
Use the “Auto tuning” or “Manual tuning” operation to tune in the
station to be preset in the memory.
(Remote control unit)
(Remote control unit)
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
Checking the preset stations
•The preset (broadcast) stations can be checked on the on screen display.
1
Press the ON SCREEN/DISPLAY button repeatedly until the “Tuner Preset Stations” screen
appears on the OSD.
1
(Remote control unit)
63
ENGLISH
To Next Page
Loading...
Need help?
General
