Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
4
When the top menu is displayed, click on the menu
you want to operate.
z2: Click when you operate each zone (vGExample 1H)
z3: Click when you operate the setup menu (vGExample 2H)
z4: Click to change the Web control screen setting. (vGExample
3H)
z5: Click when you operate a small screen such as a PDA screen,
etc. (vGExample 4H)
z2
z3
z5
1
Switch “ON” the “Network Standby” setting
(vpage 39).
2
Check the AVR-3310CI’s IP address with “Network
Information” (vpage 40).
3
Enter the AVR-3310CI IP address in browser’s
address box.
For example, if the IP address of AVR-3310CI is “192.168.100.33”,
enter “http://192.168.100.33”.
z1: Entering the IP address.
Checking the IP address.
You can operate the AVR-3310CI using a browser.
z1
Operating the AVR-3310CI with a
Browser (Web Control Function)
5
Operate.
GExample 1H Main zone control screen
z6: Click to perform each operation.
Changes to each operation screen (vGExample 5H)
z7: Click when you update to the latest information.
Normally, there is a change to the latest information each time
you operate. When operated from the main unit, click because
the screen is not updated.
z8: Click to return to the top menu.
Displayed when setting “Top Menu Link Setup” to “ON” in
GExample 3H
z9: Click to add a setting to the “Favorites” in your browser.
We recommend registering the setting screens for the different
zones in the browser’s favorites so as not to accidentally
perform menu operations for zones you do not intend to
operate.
z7
z8
z6
z9
Playback
z4
Convenient Functions
See overleaf
To Next Page
Loading...
Need help?
General
