Denon AVR-X7200W Service Manual

DISASSEMBLY
• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
• Read
"Precautions During Work"
before reassembling removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the
work. Failure to shape the wires correctly may cause problems such as noise.
FRONT PANEL ASSY
See "DISASSEMBLY"
2. FRONT PANEL ASSY
and "EXPLODED VIEW"
PCB HDMI/USB FRONT
(Ref. No. of EXPLODED VIEW : B5)
PCB FRONT JACK
(Ref. No. of EXPLODED VIEW : B7)
PCB DISPLAY
(Ref. No. of EXPLODED VIEW : D2)
PCB BT MODULE
(Ref. No. of EXPLODED VIEW : F2)
CX870 ASSY
See "DISASSEMBLY"
1. CX870 ASSY
and "EXPLODED VIEW"
PCB CX870 CONNECT
(Ref. No. of EXPLODED VIEW : F11)
CX870 MODULE
(Ref. No. of EXPLODED VIEW :
CX870
)
TOP COVER
POWER TRANS
See "DISASSEMBLY"
5. POWER TRANS
and "EXPLODED VIEW"
POWER TRANS
(Ref. No. of EXPLODED VIEW : 11)
RADIATOR ASSY
See "DISASSEMBLY"
3. RADIATOR ASSY
and "EXPLODED VIEW"
PCB P.AMP
(Ref. No. of EXPLODED VIEW : C1)
PCB R-AMP CONNECT
(Ref. No. of EXPLODED VIEW : C4)
PCB L-AMP CONNECT
(Ref. No. of EXPLODED VIEW : C5)
PCB RADI_PROTDET2
(Ref. No. of EXPLODED VIEW : C8)
PCB RADI_PROTDET1
(Ref. No. of EXPLODED VIEW : C9)
BACK PANEL ASSY
See "DISASSEMBLY"
6. BACK PANEL ASSY
and "EXPLODED VIEW"
PCB DIGITAL
(Ref. No. of EXPLODED VIEW : A)
PCB AUDIO/VIDEO
(Ref. No. of EXPLODED VIEW : B)
PCB CONNECT-1
(Ref. No. of EXPLODED VIEW : B3)
PCB CONNECT-2
(Ref. No. of EXPLODED VIEW : B4)
PCB CONNECT-3
(Ref. No. of EXPLODED VIEW : B6)
PCB CONNECT-4
(Ref. No. of EXPLODED VIEW : B8)
PCB CONNECT-5
(Ref. No. of EXPLODED VIEW : B9)
PCB 232C POHNO
(Ref. No. of EXPLODED VIEW : C7)
PCB SPEAKER
(Ref. No. of EXPLODED VIEW : D1)
PCB HL SPEAKER
(Ref. No. of EXPLODED VIEW : D3)
PCB DAC
(Ref. No. of EXPLODED VIEW : E1)
PCB REAR USB
(Ref. No. of EXPLODED VIEW : E2)
SMPS PCB
See "DISASSEMBLY"
4. SMPS PCB
and "EXPLODED VIEW"
PCB SMPS
(Ref. No. of EXPLODED VIEW : C6)
11

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g