Denon AVR-X7200W Service Manual

(3) Remove the DIGITAL PCB from the chassis and turn it over.
Place an insulation sheet larger than the PCB underneath the DIGITAL PCB.
b
Connect the earth of the PCB to the chassis using an earth wire, etc.
(4) Connect the expansion cables.
Connection table of Board to Board
No. Pin Ref.No. PCB Ref.No. PCB
q
33pin N5202 CONNECTOR-5
N1804 DIGITAL
w
19pin N5201 CONNECTOR-4
N1806 DIGITAL
e
33pin N5901 CONNECTOR-1
N1001 DIGITAL
r
17pin N5905 CONNECTOR-1
N5003 DIGITAL
t
19pin N5907 CONNECTOR-1
N5004 DIGITAL
y
21pin N5909 CONNECTOR-2
N1805 DIGITAL
Insulation sheet
PCB DIGITAL
CHASSIS-HDMI CONNECTOR
CONNECTOR-1 CONNECTOR-2
CONNECTOR-5
1
2
3 4
6
5
79

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g