EasyManuals Logo
Home>Denon>CD Player>DN-2100F

Denon DN-2100F User Manual

Denon DN-2100F
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
ENGLISH
(2) Preset change procedure
The preset procedure can be performed in the cue, pause mode, when no disc is loaded or when the disc trays is open.
1
2
Set the preset operation selection mode.
Press the PRESET button.
Select the preset item.
Turn the Track Select knob (89).
The first preset item displayed is the last preset item
displayed the last time the presettings were mode.
PUSH ENTER
Turn the knob clock-
wise to move in the
direction of the
arrows, counterclock-
wise to move in the
opposite direction.
3
4
Change the setting.
Press the Track Select knob (89).
When the Track Select knob (89) is turned, the
player returns to the same status as in step 2.
Cancel the preset mode.
Press the PRESET or PLAY/PAUSE or CUE button.
NOTE:
If the message shown below appears, there is a problem
with the preset memory. Contact a Denon authorized
service station.
9
PRESET FUNCTIONS AND OPERATIONS
(1) Preset functions
Use these functions to preset the DN-2100F’s operation modes. These presets are stored in permanent memory, so they are not cleared even
when the power is turned off.
The functions shown on page 19 can be adjusted to your preference. Set these functions according to your needs for more efficient operation.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon DN-2100F and is the answer not in the manual?

Denon DN-2100F Specifications

Power IconPower
us_canada_taiwan_power_supply120 V AC ±10%, 60 Hz
european_power_supply230 V AC ±10%, 50 Hz
power consumption21 W
Operating Environment IconOperating Environment
operational temperature5 to 35°C
operational humidity25 to 85% (no condensation)
storage temperature–20 to 60°C
Audio Specifications IconAudio Specifications
quantization16-bit linear per channel
sampling frequency44.1 kHz
oversampling rate8 times
frequency response20 to 20, 000 Hz
Outputs IconOutputs
analog output level2.0 V
digital output signal formatSPDIF
digital output level0.5 Vp-p 75 Ω
load impedance10 kΩ or more
Weight and Dimensions IconWeight and Dimensions
player unit dimensions482 (W) x 88 (H) x 252 (D) mm
remote control unit dimensions482 (W) x 88 (H) x 62 (D) mm
player unit mass6 kg
remote control unit mass1.5 kg

Related product manuals