Revision1.0 DN-C635 Serial Interface Specification
Date 2003-01-28 32 page of 39
2.6.19 Track Num Entry command
This command designates the truck that should program playback truck, in the case of program
mode in the case of a direct mode.
1) Command format
Byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Command code (‘H’)
2 Reserve ( 0x00 )
3 Track number 100 digits
4 Track number 10 digits
5 Track number 1 digits
6 ETX( 0x03 )
7 BCCH( high-level )
8 BCCL( low-level )
Table 66. Play Num Set command
2) Answer format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Reply code (‘H’)
2 Answer code (Table 3)
3 ETX( 0x03 )
4 BCCH( high-level )
5 BCCL( low-level )
Table 67. Play Num Set answer
3) Special condition
To Next Page
Loading...
Need help?
General