Denon DP-400 User Manual

6
Lower the lifter lever.
The tone arm slowly lowers, and playback starts when the stylus tip
reaches the record.
.
0
Be careful not to scratch records.
0
Observe the following during playback.
0
Do not touch the tone arm or turntable.
0
Do not disconnect the power.
0
Make sure the device is not subjected to vibration or impact.
0
Do not change the record until the turntable has completely stopped.
0
Do not apply pressure with your hand to stop the turntable while it is turning. Doing
so creates internal heat which can lead to equipment failure or fire.
Stopping playback
1
Raise the lifter lever.
Raise the tone arm to remove the stylus from the record.
2
Holding the finger lift of the headshell, return the tone
arm to the armrest.
3
Lower the lifter lever.
4
Lock the tone arm into the armrest.
.
Contents Preparations Connections
Playback and recording
Tips Appendix
26
Front panel Rear panel
I
'
=
V
I
=
V
I
V \
0

Denon DP-400 Specifications

General

Type	Belt-drive audio turntable
CD player	No
Equalizer	Yes
Operation	Manual
Motor type	DC motor
Stylus type	mm
Belt material	Rubber
Product color	Black
Wow & flutter	0.08 %
Nominal speeds	33 1/3, 45, 78 RPM
Volume control	Rotary
Signal-to-Noise Ratio (SNR)	65 dB
Frequency range	20 - 20000 Hz
Quantity	1
Shape	S-shaped tonearm
Package depth	500 mm
Package width	430 mm
Package height	250 mm
Package weight	7800 g

Weight and Dimensions

Depth	342 mm
Width	414 mm
Height	132 mm
Weight	5800 g