Denon Heos 3 User Manual

Advanced Speaker Settings
Caution
Adjusting these settings may disconnect your speaker from your network
and possibly render your speaker unusable. Do not use these features
unless you are comfortable making advanced adjustments to your
speaker.
o
Network Settings
1
Select “Advanced”.
2
Select “NETWORK SETTINGS” tab.
3
Scroll down to see all of the options for
a. Network Interface (Ethernet or Wireless)
b. Wireless Settings
c. IP Address Settings (Automatic or Manual)
d. Wireless Power Saving
4
Select Save Settings to apply the new settings or
Cancel Changes to revert to the previous settings.
o
About Wireless Power Saving
The Wireless Power Savings feature saves power by turning off power to
the wireless radio inside the HEOS device when the device is connected
to an Ethernet network. If you disconnect the Ethernet cable from the
HEOS device, Wireless Power Saving will automatically turn off and the
wireless radio will turn on so that the HEOS device can be discovered over
your wireless network.
NOTE
0
If Wireless Power Savings is ON, Wi-Fi power will be temporarily turned on when
accessing the My Devices/(My Devices)/Network screen in the HEOS app or
whenever the Connect button on the device is pressed.
Contents Setup Use Troubleshooting Status LED Appendix
39

Denon Heos 3 Specifications

General

Number of speakers	-
Audio output channels	- channels
Amplifier class	D
Impedance	- Ω
Frequency range	- Hz
RMS rated power	- W
AUX in	Yes
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Product color	White
Volume control	Digital
Recommended usage	Universal
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Mobile operating systems supported	Android, iOS
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	220 - 240 V
Operating temperature (cooling) (T-T)	5 - 35 °C
Cables included	Audio (3.5mm), LAN (RJ-45)

Weight and Dimensions

Depth	272 mm
Width	130 mm
Height	165 mm
Weight	1900 g