I ON-6OOF
HEAT RUN MODE FUNCTION
Heat Run Mode
1)
To activate
While hold pushin"-g DH_, _1_, _ and _ keys simultaneously, turn the unit power on. The remote control sensor indicator will light to
show that _e unit i¢ shifted in Heat Run mode.
Be sure to Ioadthe disc previously.
Press the disc holder open/close button ( ,,A.AOPENICLOSE) to cancel Heat Run mode.
This mode functions only for a disc with 21 pieces of music or more. For a disc with 20 pieces of music or lesser, please
do not use.
2) Operation
During the Heat Run mode to shift the unit in Play mode makes the unit replays from the first music after opens the loader once and
re-closes it when finish playing the last track (comes into lead out).
Hereafter, operates open/close of loader, servo on, reading of TOC, and playing repeatedly, and repeats playing the two tracks; the first
and the last ones.
3) Error Message
When the system error occurs While in Heat Run mode, the following error message will display on the Track No. indicator and stops
operation ....
1.E1 -
At the time of Focus Servo does not activate.
2. E2
When unable to detect synchronous pattern however the disc is in rotating. (GFS does not drive.)
3. E3
No synchronous pattern can be detected while in Play mode. (No GFS drives.)
4. E4
When TOC is unreadable in despite of servo is activated.
5. E5
In case of loader malfunctions. (Unable to turn on the switch.)
6. E6
The inner circle switch of Pick-up does not turn off.
7. E7
The inner circle switch of Pick-up does not turn on.
-JrThe number of operation up to the stop will be displayed on the minute and second portion of the indicator.
10
To Next Page
Loading...
Need help?
General
