To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Denon PMA-50 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Audio output channels | - channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.004 % |
| RMS power output per channel (4 Ohm) | 50 W |
| RMS power output per channel (8 Ohm) | 30 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 35 W |
| Purpose | Home |
| Cooling type | Passive |
| Product color | Black, Silver |
| Connectivity technology | Wired & Wireless |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 2 |
Weight and Dimensions| Depth | 258 mm |
|---|---|
| Width | 200 mm |
| Height | 86 mm |
| Weight | 2500 g |
Details the amplifier's high-quality class D design and AL32 processing.
Covers high-resolution audio support, Bluetooth, and NFC connectivity.
Identifies and explains the power button, display, remote sensor, volume knob, and input select buttons.
Describes the headphones jack, Bluetooth button, NFC mark, and installation holes.
Shows symbols displayed for different audio input sources.
Explains the data shown on the unit's information display.
Details the AC inlet and speaker terminals on the rear panel.
Describes digital audio input ports and analog AUX input connectors.
Explains the function of the subwoofer pre-out terminal.
Details the function of each button on the remote control unit.
Illustrates and names the cables required for various device connections.
Explains how to install the unit horizontally or vertically.
Guides on how to connect speakers, including cable preparation and terminal connection.
Details connecting analog and digital audio output devices.
Explains how to connect the unit to a computer via USB.
Instructions for connecting the unit's power cord.
Covers turning the unit on/off and adjusting volume/brightness.
Guides on choosing between USB-DAC, digital, analog, and Bluetooth inputs.
Explains how to play music from a PC using the USB-DAC function.
Instructions for listening to music via COAXIAL or OPTICAL digital inputs.
Details how to listen to music using the analog AUX input.
Guides on connecting and playing music wirelessly via Bluetooth.
Overview of available settings like Source Direct, Bass, Treble, Balance, Bluetooth, and Auto Standby.
Explains how to navigate and change settings using the remote control.
Details adjusting Source Direct, Bass, Treble, Balance, and H/P AMP Gain.
Explains how to enable/disable Bluetooth and configure Auto Standby mode.
Covers turning on from Bluetooth, switching devices, NFC connection, and tone adjustment.
Provides solutions for problems like no power, no sound, or distorted audio.
Lists compatible digital audio formats for USB-DAC, Coaxial, and Optical inputs.
Details supported Bluetooth profiles and codecs for audio streaming.
Defines terms like Bluetooth, DSD, NFC, Sampling Frequency, Pairing, and Protection Circuit.
Provides technical specifications for the audio section and digital inputs.
Shows the physical dimensions and weight of the unit in inches and millimeters.
