Denon PMA-50 User Manual

o
Bluetooth section
Communication system: Bluetooth version 3.0
Transmission power: Maximum 2.5 mW (Class2)
Maximum communication range: Approx. 32.8 ft/10 m in line of sight *
Frequency band: 2.4 GHz band
Modulation method: FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles: A2DP 1.3/AVRCP 1.5
Supported codecs: aptX Low Latency/AAC/SBC
z
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static
electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
o
General
Power supply: AC120 V, 60 Hz
Power consumption: 35 W
Power consumption in standby mode: 0.2 W
For purposes of improvement, specifications and design are subject to change without notice.
Contents
Connections Playback Setting procedure Tips Appendix
63
Front panel Display Rear panel Remote Index

Denon PMA-50 Specifications

General

Amplifier class	-
Audio output channels	- channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.004 %
RMS power output per channel (4 Ohm)	50 W
RMS power output per channel (8 Ohm)	30 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	35 W
Purpose	Home
Cooling type	Passive
Product color	Black, Silver
Connectivity technology	Wired & Wireless
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio coaxial in	1
Digital audio optical in	2

Weight and Dimensions

Depth	258 mm
Width	200 mm
Height	86 mm
Weight	2500 g