Denon RCD-N10 User Manual

1-1. Version Display Mode
1-1.1. Actions
Version information is displayed when the device is started in this mode.
1-1.2. Starting up
Insert the AC plug while pressing button "
POWER
", and wait for more than 3 seconds.
Release the "
POWER
" button when the Power indicator turns orange and the Eject indicator turns
white.
Select the "
Version Check
" using the "
CURSOR
f
/
d
" button, then press the "
ENTER
" button to con-
rm.
Startup display
1-1.3. Display Order
q
System Version →
w
System (Bootloader) Version →
e
Touch Sensor Version
→
r
HEOS Version →
t
HEOS Build →
y
HEOS Module →
u
HEOS Conguration
→
i
HEOS Locale →
o
Restore →
Q0
Ether Mac Address →
Q1
WiFi Mac Address
→
Q2
BT Mac Address →
Q3
Serial Number ·····
Unplug the AC plug to cancel this mode.
q
System Version :
w
System (Bootloader) Version
e
Touch Sensor Version
r
HEOS Version
t
HEOS Build
y
HEOS Module
u
HEOS Conguration
i
HEOS Locale
o
Restore
Q0
Ether Mac Address
Q1
WiFi Mac Address
Q2
BT Mac Address
Q3
Serial Number
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
59

Denon RCD-N10 Specifications

General

Brand	Denon
Model	RCD-N10
Category	Car Receiver
Language	English