DeWalt D25892 Instruction Manual

ENGLISH
22
Symbol Mode Application
Chisel
Adjustment
Chisel position
adjustment
Chipping
Light chipping, chiseling
and demolition
To Select a Mode
1. Rotate the mode selector dial so that the arrow points to
the symbol corresponding for the desiredmode.
Fig. E
4
NOTE: The arrow on the mode selector dial
4
must be
pointing at a mode symbol at all times. There are no
operable positions inbetween.
Performing an Application (Fig. F)

WARNING: TO REDUCE THE RISK OF PERSONAL
INJURY, ALWAYS ensure workpiece is anchored or
clampedfirmly.
NOTE: Operating temperature of this tool is -7˚ to +40˚C
(19˚ to 104˚F). Using the tool outside of this temperature
range will decrease the life of thetool.
1. Insert the appropriate chisel and rotate it by hand to
lock it into the desired position. Refer to Chisel and
ChiselHolder.
2. Using the mode selector dial
4
, selectchipping mode .
Refer to ModeSelection.
3. Adjust the side handle
2
asnecessary.
Fig. F
2
4
1
4. Place the chisel on the desiredlocation.
5. Depress the rocker switch
1
.
6. To stop the hammer, release theswitch.
MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
Your D
e
WALT power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regularcleaning.
Lubrication
Your power tool requires no additionallubrication.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the
risk of eye injury, always wear approved eye protection
when performingthis.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into aliquid.
Accessories

WARNING: Since accessories, other than those
offered by
DeWALT
, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only
DeWALT
recommended accessories should be used with
thisproduct.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
servicecenter.
Various types of SDS MAX chisels are available as anoption.
Accessories and attachments used must be regularly
lubricated around the SDS MAXfitment.
Repairs
The charger and battery pack are notserviceable.

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should
be performed by a
DeWALT
factory service center
or a
DeWALT
authorized service center. Always use
identical replacementparts.
Protecting the Environment
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal householdwaste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to localprovisions.

DeWalt D25892 Specifications

General

Brand	DeWalt
Model	D25892
Category	Tools
Language	English