10
ENGLISH
Description (Fig.A)
WARNING: Never modify the power tool or any part of it. Damage or personal injury
couldresult.
1
Trigger switch
2
Operating handle
3
Mounting holes
4
Lower guard
5
Mitre lock knob
6
Kerf plate
7
Mitre arm
8
Mitre scale
9
Mitre scale screws
10
Side handles
11
Fence
12
Bevel lock knob
13
Rails
14
Dust port
15
Lifting handle
16
Battery pack
17
XPS™ worklight momentary switch
18
Lock off lever
19
Rail adjustment screw
20
Rail lock knob
21
Clamp hole
22
Blade wrench
23
Lock down pin
24
Date code
25
Bevel override
Intended Use
Your DeWALT DCS365 cordless sliding compound mitre saw has been designed for
professional wood cutting applications. It performs the sawing operations of cross‑cutting,
bevelling and mitring easily, accurately andsafely.
This unit is designed for use with a nominal blade diameter 184mm carbide tipblade.
NEVER CUT METALS or light alloy, especiallymagnesium.
DO NOT use under wet conditions or in the presence of flammable liquids orgases.
These mitre saws are professional power tools
DO NOT let children come into contact with the tool. Supervision is required when
inexperienced operators use thistool.
• Young children and the infirm. This appliance is not intended for use by young children
or infirm persons withoutsupervision.
• This product is not intended for use by persons (including children) suffering from
diminished physical, sensory or mental abilities; lack of experience, knowledge or skills
Date Code Position (Fig.A)
The date code
24
, which also includes the year of manufacture, is printed into thehousing.
Example:
2020 XX XX
Year of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Keep hands away fromblade.
Visible radiation. Do not stare intolight.
Package Contents
The package contains:
1 Mitre saw
1 Blade wrench
1 Saw blade
1 Side handle package
1 Dustbag
1 Material clamp
1 Li‑Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included with N models. Battery packs and
chargers are not included with NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth®, SIG, Inc. and any use of such marks by DeWALT is under license. Other trademarks
and trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may have occurred duringtransport.
• Take the time to thoroughly read and understand this manual prior tooperation.
Battery Type
The following SKU(s) operate on a 18 volt battery pack: DCS365
These battery packs may be used: DCB181, DCB182, DCB183, DCB183B, DCB184, DCB184B,
DCB185, DCB187, DCB189, DCB546, DCB547, DCB548. Refer to Technical Data for
moreinformation.
pack. Furthermore, due to regulation complexities, DeWALT does not recommend air shipping
lithium‑ion battery packs alone regardless of Watt Hour rating. Shipments of tools with
batteries (combo kits) can be air shipped as excepted if the Watt Hour rating of the battery
pack is no greater than 100Wh.
Regardless of whether a shipment is considered excepted or fully regulated, it is the
shipper's responsibility to consult the latest regulations for packaging, labeling/marking and
documentationrequirements.
The information provided in this section of the manual is provided in good faith and believed
to be accurate at the time the document was created. However, no warranty, expressed or
implied, is given. It is the buyer’s responsibility to ensure that its activities comply with the
applicableregulations.
Transporting the FLEXVOLT
TM
Battery
The DeWALT FLEXVOLT
TM
battery has two modes: Use andTransport.
Use Mode: When the FLEXVOLT
TM
battery stands alone or is in a DeWALT 18V product, it
will operate as an 18V battery. When the FLEXVOLT
TM
battery is in a 54V or a 108V (two 54V
batteries) product, it will operate as a 54Vbattery.
Transport Mode: When the cap is attached to the FLEXVOLT
TM
battery, the battery is in
Transport mode. Keep the cap forshipping.
When in Transport mode, strings of cells are electrically
disconnected within the pack resulting in 3batteries with a
lower Watt hour (Wh) rating as compared to 1battery with a
higher Watt hour rating. This increased quantity of 3batteries
with the lower Watt hour rating can exempt the pack from certain shipping regulations that
are imposed upon the higher Watt hour batteries.
For example, the Transport Wh rating might indicate
3x36Wh, meaning 3batteries of 36Wh each. The Use
Wh rating might indicate 108Wh (1batteryimplied).
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct sunlight and excess
heat or cold. For optimum battery performance and life, store battery packs at room
temperature when not inuse.
2. For long storage, it is recommended to store a fully charged battery pack in a cool, dry
place out of the charger for optimalresults.
NOTE: Battery packs should not be stored completely depleted of charge. The battery pack
will need to be recharged beforeuse.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels on the charger and the battery
pack may show the following pictographs:
L
Read instruction manual beforeuse.
p
See Technical Data for chargingtime.
q
Do not probe with conductiveobjects.
r
Do not charge damaged batterypacks.
s
Do not expose towater.
t
Have defective cords replacedimmediately
u
Charge only between 4˚C and 40˚C.
v
Only for indooruse.
x
Discard the battery pack with due care for theenvironment.
y
Charge DeWALT battery packs only with designated DeWALT chargers. Charging
battery packs other than the designated DeWALT batteries with a DeWALT charger
may make them burst or lead to other dangeroussituations.
z
Do not incinerate the batterypack.
B
USE (without transport cap). Example: Wh rating indicates 108Wh (1battery with
108Wh).
A
TRANSPORT (with built‑in transport cap). Example: Wh rating indicates 3x 36Wh
(3batteries of 36Wh).
Example of Use and Transport Label Marking