DeWalt DCS571 User Manual

4
ENGLISH
EC-Declaration of Conformity
Machinery Directive
115 mm Circular Saw
DCS571
DeWALT declares that these products described under
Technical Data are in compliance with: 2006/42/EC,
EN62841‑1:2015, EN62841‑2‑5:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU.For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Vice President of Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
D‑65510, Idstein, Germany
25.10.2019
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word.Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
Congratulations!
You have chosen a DeWALT tool.Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCS571
Voltage V
DC
18
Type 1
Battery type Li-Ion
No-load speed min
-1
4500
Blade diameter mm 115
Maximum depth of cut mm 39.5
Blade bore mm 9.5
Bevel angle adjustment 0°–45°
Weight (without battery pack) kg 2.5
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-5:
L
PA
(emission sound pressure level) dB(A) 91
L
WA
(sound power level) dB(A) 102
K (uncertainty for the given sound level) dB(A) 3
Vibration emission value a
h
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another.It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool.However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ.This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job.This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm(relevant for vibration), organisation of
workpatterns.
English(original instructions)
115 mm CIRCULAR SAW
DCS571

DeWalt DCS571 Specifications

General

Quantity per pack	1 pc(s)