10
ENGLISH
DCB184B, DCB185, DCB546. Refer to Technical Data for
moreinformation.
Package Contents
The package contains:
1 Vacuum cleaner
1 Vacuum hose
1 Wide nozzle
1 Crevice tool
1 Dust extraction adapter
1 Filter
1 Instruction manual
• Check for damage to the appliance, parts or accessories which
may have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Vacuum
The following pictograms are shown on the appliance:
Read instruction manual beforeuse.
WARNING: This appliance contains harmful dust. The
emptying and maintenance, including the removal of
the dust bag, may only be executed by trained personnel
wearing suitable protection equipment. Do not switch on
until the complete filter system has beeninstalled.
Class L dust extractors are suitable to extract dry, non-
combustable dusts with workpace limit values of >1mg/m³.
Date Code Position (Fig. A)
The date code
20
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A, B, E)
WARNING: Never modify the vacuum cleaner or any part
of it. Damage or personal injury couldresult.
1
On/off switch
2
Power head
3
Tank
4
Vacuum inlet
5
Blow outlet
6
Latch
7
Wide nozzle
8
Crevice tool
9
Hose
10
Battery port
11
Air-lock connector
12
Dust extraction adaptor (Fig. E)
Intended Use
Your DCV582L cordless/corded industrial vacuum cleaner and
dust extractor for mobile operation to take up wet substances or
all types of dry, non-combustable dusts up to dust Class L with
limit values for occupational exposure greater than 1 mg/m³.
This appliance can also be operated as a blower for removing
debris from the workplace and for drying damp surfaces.
Working on mains (corded) or battery (cordless) power, this
appliance can be used both indoors andoutdoors.
DO NOT use blower for removing hazardousdust.
DO NOT let children come into contact with this appliance.
Supervision is required when inexperienced operators use
thisappliance.
DO NOT use the dust extractor for combustibledust.
DO NOT use the dust extractor in explosiveatmospheres.
DO NOT use under wet conditions or in presence of flammable
liquids orgases.
NOTE: This appliance is suited for the commercial use, e.g.
in hotels, schools, hospitals, factories, shops, offices, rental
companies, and on constructionsites.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
ASSEMBLY AND ADJUSTMENTS
WARNING : To reduce the risk of serious personal
injury, turn appliance off and disconnect appliance
from power source and remove battery pack before
making any adjustments or removing/installing
attachments or accessories. An accidental start-up can
causeinjury.
WARNING: Use only
battery packs andchargers.
Inserting and Removing the
Battery Pack from the Tool (Fig. C)
NOTE: For best results, make sure your battery pack is
fullycharged.
To install the battery pack
1. Align the battery pack
13
with the rails inside the vacuum’s
battery port
10
.
2. Slide the pack into the battery port until the battery pack
is firmly seated in the battery port and ensure that it does
notdisengage.
To remove the battery pack
1. Press the battery release button and firmly pull the battery
pack out of theport.
2. Insert battery pack into the charger as described in the
charger section of thismanual.