3
E
Contents
• User Safety
• Charging the Battery
• Using the Tool
• Warranty
• Specications
Retain all sections of this manual for future
reference.
User Safety
WARNING:
Carefully read the Safety Instructions
and Product Manual before using
this product. The person responsible
for the product must ensure that all
users understand and adhere to these
instructions.
WARNING:
The following label information is
placed on your laser tool to inform you
of the laser class for your convenience
and safety (Figure
B
).
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
WARNING: To reduce the risk of
injury, user must read this
instruction manual and the
safety manual.
WARNING: LASER RADIATION.
DO NOT STARE INTO BEAM.
Class 2 Laser Product.
The DW055PL tool emits a visible laser
beam, as shown in Figure
A
1
. The laser
beam emitted is Laser Class 2 and complies
with 21 CFR 1040.10 and 1040.11 except
for conformance with IEC 60825-1, Ed. 3,
as described in Laser Notice 56, dated May
8, 2019.
WARNING:
While the laser tool is in operation,
be careful not to expose your eyes
to the emitting laser beam (red light
source). Exposure to a laser beam
for an extended time period may be
hazardous to your eyes. Do not look
into the beam with optical aids.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identier: DW055PL
Responsible Party – U.S. Contact
Information
DEWALT
701 East Joppa Road
Towson, Maryland 21286
www.DEWALT.com
To Next Page
Loading...
Need help?
General
