38
ENGLISH
Do not probe with conductiveobjects.
Do not charge damaged batterypacks.
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge
battery packs only with designated
chargers. Charging battery packs other than
the designated
batteries with a
charger may make them burst or lead to other
dangeroussituations.
Do not incinerate the batterypack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3batteries of 36 Wh).
Battery Type
The DCS520 operates on a 54 volt batterypack.
The DCB546, DCB547, DCB548 battery packs may be used. Refer
to Technical Data for moreinformation.
Package Contents
The package contains:
1 Plunge saw
1 Hex wrench
1 Li-Ion battery pack (T1 models)
2 Li-Ion battery packs (T2 models)
3 Li-Ion battery packs (T3 models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Maximum depth of cut
Blade diameter
Date Code Position (Fig. A)
The date code
16
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Plunge trigger
2
On/off switch
3
Main handle
4
Shoe
5
Rail adjustment knobs
6
Bevel scale
7
Bevel adjustment knobs
8
Depth adjustment knobs
9
Depth scale
10
Blade
11
Front handle
12
Spindle lock button
13
Spindle lock lever
14
Battery pack
15
Battery release button
16
Date code
17
Dust extraction outlet
18
Anti-kickback knob
19
Speed wheel
20
Fuel gauge
Intended Use
The DCS520 cordless plunge saw is designed for professional
sawing of woodproducts.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This heavy-duty plunge saw is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
To Next Page
Loading...
Need help?
General
