This manual will guide you through the setup and use of all Reactor Series relay controllers. Following this manual in the sequence outlined is absolutely essential to proper understanding and use of
Reactor Series Controllers. Please review the entire manual BEFORE contacting NCD technical support. NCD technical support staff will direct your questions to this manual when applicable.
Page 3 Quick Start Guide: Connect ME
Technical Support Limitations:
National Control Devices is unable to provide complete technical support for this device. This
device incorporates substantial technology and firmware manufactured by a 3rd party company,
and has been tested for compatibility with the NCD product line. NCD Technical Support will
share any knowledge we have obtained with regard to the integration of this 3rd party technology
into our product line in an effort to assist customers whenever possible. However, advanced
communication problems may require customers to directly contact the technical support depart-
ment of the 3rd party company. NCD Technical Support will not contact the 3rd party company
on behalf of our customers unless NCD Technical Support is able to recreate the problem experi-
enced by our customers.
National Control Devices has integrated the following 3rd party technologies into our product line:
WiFi Communications Roving Networks http://www.rovingnetworks.com/
Bluetooth Communications SENA http://www.sena.com/
802.15.4 Wireless Communications DIGI http://www.digi.com/
ZigBee Wireless Communications DIGI http://www.digi.com/
XSC Wireless Communications DIGI http://www.digi.com/
Ethernet Connect ME DIGI http://www.digi.com/
USB Virtual COM Port FTDI http://www.ftdichip.com/
All other communication technologies are manufactured by National Control Devices and are fully
supported by NCD Technical Support staff. Please contact NCD Technical Support Staff and re-
view our forum posts at AccessNCD (http://iorelay.ning.com/)
To Next Page
Loading...
Need help?
General
