Digi ConnectPort LTS 16 Command Reference

Command descriptions boot
ConnectPort® LTS Command Reference
19
boot
Purpose
Reboots the ConnectPort LTS product, restores the device configuration to factory default settings, or
loads new firmware files from a TFTP server.
Required permissions
For products with two or more users, permissions must be set to “set permissions boot=execute” to
use this command. See "set permissions" for details on setting user permissions for commands.
Syntax
Reboot the ConnectPort LTS product
boot action=reset
Restore configuration defaults
boot action=factory
Load new firmware into flash ROM from a TFTP host
boot load= host ip address : loadfile
Options
action
The action to be performed.
factory
Resets the entire configuration to factory defaults, and then reboots the device.
reset
Reboots the device.
load
The firmware to be loaded.
host ip address
The IP address of a host with new firmware, which is then burned into flash ROM. The
host must be running a TFTP server.
loadfile
The name of a firmware file. The software automatically detects the type of file and
performs the appropriate load operation.

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English