Command descriptions set portgroup
ConnectPort® LTS Command Reference
90
set portgroup
Purpose
Configures or displays port group settings. Port group is a convenience feature which can be created
to send data to multiple ports. Instead of sending data to individual serial ports, data can be sent to all
ports in a group simultaneously through a port in a group.
Required permissions
Permissions must be set to one of the following:
n For a user to display the port group
n Settings for serial ports: “set permissions s-serial=read”
n For a user to display and set the authentication settings for serial ports: “set permissions s-
serial=rw”
Syntax
Add and configure a new port group
set portgroup add index=1-16
[newname=
new group name
]
[ports=0-32]
[showdata={on|off}]
[sendbyte=1-4096]
[sendidle=1-65535]
Remove port groups
set portgroup remove index=1-16
Display current port group settings for all available port groups
set portgroup
Display current port group settings for a particular port group
set portgroup name=
group name
Options
add
Add a port group. A maximum of 16 port groups can be defined.
remove
Remove port groups
index=1-16
Specifies the index number of port group or range of port group indexes to be acted on.
name=group name
To Next Page
Loading...
Need help?
General