Digi ConnectPort LTS 8 Command Reference

Command descriptions set permissions
ConnectPort® LTS Command Reference
78
set permissions
Purpose
Used to set user permissions associated with various services and command-line interface (CLI)
commands, or display current permission settings.
Commands without permissions
There are no permissions associated with the following commands:
n close
n exit
n help
n info
n quit
Permissions for the “revert” command
For the “revert” command, the permissions associated with the various “set” commands are used,
except for the “revert all” command variant, which uses a different mechanism that bypasses the
individual “set” commands.
Required permissions
For products with two or more users, permissions must be set to
“set permissions s-permissions=read” to display permissions, and “set permissions s-
permissions=rw” to display and change permissions.
When permissions are set to “set permissions s-permissions=rw,” a user cannot set another user’s
permission level higher than their own level, nor can they raise their own permission level.
Syntax
Set permissions
set permissions [type={user|group}]
{id= range |name= string }
[backup={none|execute}]
[boot={none|execute}]
[buffers={none|r-self|read|rw-self|
w-self-r|rw}]
[connect={none|execute}]
[display={none|execute}]
[filesys=(none|read|rw)]
[kill={none|execute}]
[newpass={none|rw-self|rw}]
[ping={none|execute}]
[python={none|execute}]
[reconnect={none|execute}]
[revert-all={none|execute}]
[rlogin={none|execute}]
[status={none|execute}]

Digi ConnectPort LTS 8 Specifications

General

Brand	Digi
Model	ConnectPort LTS 8
Category	Server
Language	English