Digikeijs DR 4088 series User Manual

DR4088CS / GND / OPTO 2021-08-11
P 1
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
DR 4088xx
Instrucon manual
(2021-08-11)
© Copyright 2005 – 2018 digikeijs, the Netherlands. All
rights reserved. No informaon, images or any part of
this document may be copied without the prior wrien
permission of Digikeijs.

Digikeijs DR 4088 series Specifications

General

Brand	Digikeijs
Model	DR 4088 series
Category	Control Unit
Language	English

Summary

Product Overview

General Product Information

Provides a general overview of the DR4088xx feedback module and its different versions (CS, OPTO, GND).

Technical Specifications

Details electrical specifications, including input capacity, load limits, and terminal cross-section.

Hardware Overview

Illustrates and explains the physical connectors and components of the DR4088xx module.

Programming the DR4088xx

Assigning Start Address with DR50xx

Explains how to set the starting address and module count for the S88(N) bus using the DR50xx tool.

DR4088xx Reset Functionality

States that the DR4088xx module has no factory reset function as settings are not stored internally.

Connection Examples

DR4088CS 2-Wire Track Connection

Illustrates connecting multiple DR4088CS modules for 2-wire track feedback with a DR5000 central unit.

DR4088CS with DR5033 Booster (2-Wire Track)

Shows how to connect DR4088CS modules with a DR5033 Booster for 2-wire track systems.

DR4088OPTO Hall Sensors (3-Wire Track)

Demonstrates wiring DR4088OPTO for Hall sensors on a 3-wire track system.

DR4088OPTO Switch Track (2-Wire Track)

Details the connection of DR4088OPTO for switches on a 2-wire track system.

DR4088GND Switches, Buttons, Reed Contacts

Presents connection examples for DR4088GND with switches, buttons, and reed contacts.