DigiTech BASS SYNTH WAH User Manual

10. Indicator LED
This LED indicates when the effect is turned on. If the LED
becomes dim or does not light when the cables are connected, the
battery needs to be replaced.
11. Out 2 (Effect) Jack
Connect this output to a second amplifier or to a mixer channel for
effect signal only. When Out 2 is connected, only effect signal is
present when the Bass Synth Wah is turned on. Out 2 is muted
when the Bass Synth Wah is bypassed.

DigiTech BASS SYNTH WAH Specifications

Power

power supply	9V Alkaline Dry Battery
power consumption	4.8 Watts
optional power supply	PS200R - 100 (100V ~ 50/60Hz), 120 (120V ~ 60Hz), 230 (230V ~ 50Hz), 240 (240V ~ 50Hz)

Electrical Specifications

input impedance	1 MOhms
output impedance	100 Ohms
battery life	Approximately 4 hours (with continuous usage)

Weight and Dimensions

dimensions	4 15/16” (L) x 3 1/8” (W) x 2 1/8” (H)
weight	1.38 lbs