DigiTech DEATHMETAL User Manual

The legendary Death Metal pedal is by far the most extreme distortion
you will ever hear. Simply put, we have turned the gain up to “eleven”
and ripped the knob off. Level, Low, Mid, and High tone controls provide
flexible tone shaping, so even though this distortion is over the top, your
guitar is guaranteed to cut through.
1. Level Knob
Controls the distortion output level. Turn this knob clockwise to
increase the output level, and counter-clockwise to decrease output
level.
2. Low Knob
Controls the boost or cut of low frequencies. Turn this knob clockwise
to increase the low frequency content, and counter-clockwise to
decrease the low frequency content.
3.AC Adapter Jack
Connect a DigiTech PS200R power supply to this jack. Use the proper
supply for your area’s Mains line voltage.

DigiTech DEATHMETAL Specifications

Power

power supply	9V Alkaline Dry Battery
current draw	21mA (at 9VDC)
power consumption	4.8 Watts (w/optional PS200R power supply)
battery life	approximately 18 hours

Electrical Specifications

input impedance	1 MOhms
output impedance	100 Ohms
optional power supply PS200R - 100	100V ~ 50/60Hz
optional power supply PS200R - 120	120V ~ 60Hz
optional power supply PS200R - 230	230V ~ 50Hz
optional power supply PS200R - 240	240V ~ 50Hz

Weight and Dimensions

dimensions	4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H)
weight	1.38 lbs