DigiTech DEATHMETAL User Manual

8. Pedal
Press the pedal to turn the effect on and off.
9. Out 1(Amp) Jack
Connect this output to your guitar amplifier.
10. Indicator LED
This LED indicates when the effect is turned on. If the LED becomes
dim or does not light when the cables are connected, the battery needs
to be replaced.
11. Out 2 (Mixer) Jack
This output features DigiTech’s speaker cabinet emulation, that lets you
run the pedal directly into a mixer or recorder input without having to
use a guitar amplifier.

DigiTech DEATHMETAL Specifications

Power

power supply	9V Alkaline Dry Battery
current draw	21mA (at 9VDC)
power consumption	4.8 Watts (w/optional PS200R power supply)
battery life	approximately 18 hours

Electrical Specifications

input impedance	1 MOhms
output impedance	100 Ohms
optional power supply PS200R - 100	100V ~ 50/60Hz
optional power supply PS200R - 120	120V ~ 60Hz
optional power supply PS200R - 230	230V ~ 50Hz
optional power supply PS200R - 240	240V ~ 50Hz

Weight and Dimensions

dimensions	4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H)
weight	1.38 lbs