DigiTech iPB-10 User Manual

27
Changing Pedal Settings
1. If the Pedalboard window is not already acve, select
it by touching the Pedalboard icon.
2. Touch the Expansion bar to expand the view and show
all pedals.
3. Place your nger on the knob you want to modify and
drag it up to increase the value or down to decrease
the value. A pop over display will appear providing
instant feedback as the seng is changed. Once the
desired value is reached, li your nger from the
window. The seng will remain changed at this point.
HINT: Tapping twice on any eect pedal will zoom in on the
pedal, making it even easier to adjust the eect parameters.
Tap anywhere, other than on a knob or switch, to exit zoom
view.
HINT: Tapping on the footswitch for each pedal allows you
to bypass and engage the pedal (the LED will light when
the pedal is engaged).
Working With PedalsWorking With Pedals
1.
2.
3.

DigiTech iPB-10 Specifications

General

Brand	DigiTech
Model	iPB-10
Category	Music Pedal
Language	English