it for about 2 seconds to turn on the backlight. Long press again to turn
off the backlight.
Note: As the backlight consumes more power, it’s better to turn off it in light
places.
MODE : There are four modes to be selected from MODE indicator on
LCD.
SENS : Used to adjust sensitivity level. Press SENS, then press + or -
button to increase or decrease the sensitivity. The level will be displayed on
the LCD.
INCREASE (+) : To increase the level of sensitivity and the range of
discrimination working with SENS and DISC.
DECREASE (-) : To decrease the level of sensitivity and the range of
discrimination working with SENS and DISC.
PP : Pinpoints the location of the target accurately.
SEARCH MODES
The detector includes four search modes: A/M (ALL METAL), DISC
(DISCRIMINATION), MEMORY, JEWELRY. Select the mode that suits the targets
you hope to find.
• A/M (ALL METAL) Mode
This mode is designed to detect all types of metal.
• DISC (DISCRIMINATION) Mode
The DISC mode can eliminate the unwanted metal targets and works with “+”.
• MEMORY
The detector is designed to detect the only memorized metal target.
• JEWELRY Mode
This does not mean that the detector will search only for jewelry while in
To Next Page
Loading...
Need help?
General