Step 6. Slowly sweep a sample of the material you want the detector to find (such
as a gold ring or a coin) 2-3 inches or more above the face of the search coil. When
the detector detects any metal, it sounds a tone and the target icon will flash. Also
LCD displays the digital value of target as well as the depth of it. Please note that
the depth is only a reference.
Note:
If you are using a coin, the detector will detect it more easily if you hold it
so a flat side is parallel with the flat side of the search coil. A sweep with the side
of coin over search coil might cause false indication and unstable display of target.
TARGET INDICATIONS
Target
Iron
Nickel
Jewelry
S-caps
Copper
Silver
ID
Display
(flash)
(flash)
value
Note: There is a wide variety of metals and no target can be identified for certain
until unearthed. This table is for general reference only.
OUTDOOR TESTING AND USE
Step 1. Press power button to turn on the detector.
Step 2. Follow the step 2 described in section of Indoor Testing and Use to set the
operating mode.