DigiTech RP355 User Manual

17
Cabinet - When the Amp/Cabinet row is selected, Knob 2 selects the speaker Cabinet
model.
 - Based on a 1x8 ‘57 Fender
®
Tweed Champ
®
 - Based on a 1x12 ‘57 Fender
Tweed Deluxe
®
 - Based on a 1x12 ‘65 Fender
Blackface Deluxe Reverb
 - Based on a 2x12 ‘57 Fender
Blonde Bassman
®
 - Based on a 2x12 ‘65 Fender
Blackface Twin Reverb
®
 - Based on a 2x12 ‘63 Vox
®
AC30
Top Boost w/ Jensen
®
Blue Backs
 - Based on a 4x10 ‘59 Fender
Tweed Bassman
®
 - Based on a 4x12 Marshall
®
1969
Straight w/ Celestion
®
G12-T70
 - Based on a 4x12 Marshall 1969
Slant w/ Celestion 25W Green
backs
 - Based on a 4x12 Hiwatt
®
Custom
w/ Fane Speakers
 - Based on a 4x12 ‘96 VHT
®
Slant
w/ Celestion Vintage 30’s
 - Based on a 4x12 Johnson
®
Straight w/ Celestion Vintage 30’s
 - 4x12 DigiTech
®
Solo
 - 2x12 DigiTech Bright
 - 4x12 DigiTech Metal
 - 4x12 DigiTech Rock
 - 4x12 DigiTech Alt Rock
 - 4x12 DigiTech Vintage
 - No cabinet model
AmpGain-Knob3 adjusts the Gain (distortion) for the selected Amp model (not avail-
able for Acoustic and Direct). The Gain parameter ranges from  to .
Amp Level - Knob 6 adjusts the Level (volume) of the selected Amp model. The Level
parameter ranges from  to .
EQ
The RP355’s EQ helps further shape your tone with Bass, Midrange, and Treble controls. To help
get you started, there are four preset EQ curves: Mid Boost (), Scoop (), Bright
(), and Warm () that can be selected using Knob 1. Bass, Midrange, and Treble
parameters range from -12dB to +12dB.
Note: You can select different EQ models and/or modify EQ settings for each amp channel
(Amp A and Amp B). When the EQ row is selected, press the AmpA/BFootswitch to select a
channel. The display will show which channel is selected ( or ).
EQ Model - Knob 1 selects between 4 different EQ modes (Mid Boost, Scoop, Bright,
and Warm), each with different frequency centers for Mid and Treble. Pressing this knob
turns the EQ on and off.
Bass - Knob 2 adjusts the amount of low end level (Bass).
Mid Frequency - Knob3 selects the frequency that the Mid parameter adjusts. Ranges
from 300 Hz to 5000 Hz.
MidRange-Knob 4 adjusts the amount of midrange level.
Treble - Knob5 adjusts the amount of high end level (Treble).
Presence - Knob 6 boosts or cuts the Presence level for the selected channel. Ranges
from -12dB to 12dB.
Treble Frequency (X-Edit
TM
only) - This parameter selects the frequency that the
Treble parameter adjusts. Ranges from 500 Hz to 8000 Hz.

DigiTech RP355 Specifications

General

Brand	DigiTech
Model	RP355
Category	Computer Hardware
Language	English