DigiTech RP355 User Manual

21
Tremolo/Panner
A Tremolo effect modulates the volume of the signal at an even rate. The RP355 includes the
following Tremolo models:  (the DigiTech
®
Tremolo),  (based on the Fender
®
Opto Tremolo),  (based on the Vox
®
Bias Tremolo), and  (the DigiTech Panner).
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Speed-Knob3 adjusts the rate (Speed) at which the volume modulates. Ranges from 
to 
Depth - Knob 4 adjusts the intensity (Depth) of the modulating volume. Ranges from 
to .
Waveform (DigiTech Tremolo and Panner only) -Knob5 selects a waveform:
, , or .
Envelope Filter ()
The DigiTech Envelope Filter is a dynamic Wah effect that alters your sound based upon how
hard you play.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Sensitivity-Knob3 adjusts the sensitivity or the input signal required to trigger the
Wah effect. Ranges from  to .
Range-Knob4 controls the range of the Envelope effect. Ranges from  to .
DODFX25 ()
This envelope filter is based on the DOD FX25.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Blend-Knob3 adjusts the balance between effect signal and dry signal.
Sensitivity - Knob 4 adjusts the sensitivity or the input signal required to trigger the
Wah effect. Ranges from  to .
Range-Knob5 controls the range of the envelope effect. Ranges from  to .
AutoYa™ ()
An AutoYa
TM
combines the characteristics of a Wah and a Flanger together creating an almost
human vowel characteristic as if the guitar were saying “Yah.” The AutoYa automatically provides
this animation to the sound at an even rate.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Speed-Knob3 adjusts the speed of the AutoYa sweep. Ranges from  to .
Intensity - Knob 4 adjusts the intensity of the AutoYa effect. Ranges from  to .
Range-Knob5 adjusts the throaty quality of the AutoYa effect. Ranges from  to .

DigiTech RP355 Specifications

General

Brand	DigiTech
Model	RP355
Category	Computer Hardware
Language	English