Adjusting the Display Contrast
1.
To adjust the display contrast in the S-200, simply press the <Utility> button and then press the <Parameter 4>
button and thedisplay will appear something like this:
2.
At this point, simply turn the <Program/Data>
wheel to select the desired display contrast. To exit this or any other utility modefunction, simply press the <Program> button.
MIDI Functions of the S-200
Within the Utility menu of the S-200, several MIDI functions are available including: MIDI Channel selection and MIDI CC Commands. The
following, will show you how to access and optimize these features.
Select MIDI Channel
1. To select the MIDI channel in which the S-200 receives program change information, from Program mode, press the <Utility> button
and then press the <Parameter 2> and the display will appear as follows:
2.
At this point, simply turn the <Program/Data>
wheel to select the desired MIDI channel. The options for the MIDI channel selectionranges from: 1-16, ALLand Off.
MIDI program change numbers are as follows:
1-99 = Programs
100 = Effects Bypass
101 = Exit Effects Bypass
102 = Effect Bypass Toggle
103 = Selects User Program Bank
104 = Selects Factory Program Bank
3.
To exit the MIDI channel menu, press the <Program>
button.
To Next Page
Loading...
Need help?
General
