The Pitch Shifting effects menu includes a Pitch Shifting effect that allows you to shift the original signal to help produce Harmony effects,
while the Detuner effect will help you thicken up any signal to add dimension to your sound. Parameters for the Pitch Shifting Effects are as
follows:
Shift This parameter sets how far the signal is shifted. Range is from -24 to +24 semi-tones.
Tracking This lets you select the tracking of the Pitch shifter effects. Range is from 1 to 3.
Detune Amount This parameter sets the amount of Detune in the effect. Range is from -24 to +12 cents.
Level This parameter sets the overall level of the Pitch shifter effect. Range is from 0 to 100.
Level This parameter allows you to set the overall level of the selected effect. Range is from 0 to 99.
The S-200 offers three different Delay effects including: Mono, Stereo and 2-Tap, offering the ultimate flexibility in digital delay applications.
The S-200 also offers a Karaoke delay effect. The parameters and their values are as follows:
Note: When Delay effects are used in Effect Configuration 1 (which is a Combined Engine effect module), longer delay times are
available. These Delay time differences are marked C (Combined) and S(Single) in the Maximum delay time chart which
follows.
Maximum Delay times
D-1 Mono (Single =1000 milliseconds and Combined=2000 milliseconds)
D-2 Stereo (Single =700 milliseconds and Combined =1000 milliseconds)
D-3 2-Tap (Single=1000 milliseconds and Combined=2000 milliseconds)
Delay Coarse This parameter controls the length of the Delay Coarse time Range is from 100 milliseconds to 2
seconds).