Delay Fine This parameter controls the length of the Delay Fine time. Range is from 0 to 99 milliseconds.
Echo This parameter controls the length of the Echo that is offered in the Karaoke. Echo settings are 1-5.
Feedback This parameter controls the amount of delay repeats in the delay effect. Range is from 0 to 99% and
repeat-hold.
Repeat This parameter controls the number of delay repeats in the D-4 Karaoke effect. Range is from 1 to 10.
Level This parameter allows you to set the overall level of the selected effect. Range is from 0 to 100.
Reverb is the perfect effect for adding dimension to any recording or live application where you need to emulate the size and shapes of
different types of rooms. The following explains the parameters that are available in the Reverb effects.
Note: When Reverb is used in Effect Configuration 1 (Whole effect module) larger and denser sounding Reverbs can be attained.
Pre Delay Controls the length of time before the reverb reflections are heard. Range is from 0 to 99 ms.
Decay This parameter controls the decay length (reverb time) of the reverberation. Range is from 1 to 10.
Damping This parameter controls the high frequency decay of the reverb effect and ranges from 1 to 10.
Diffusion This parameter controls the reverb smoothness and ranges from 1 to 10.
Level This parameter allows you to set the overall level of the selected effect. Range is from 0 to 100.
To Next Page
Loading...
Need help?
General
