15
SET LCD DISPLAY CONTRAST
In normal mode, press [ / CAL ] key to adjust LCD contrast for best viewing on table stand or
wall mounted.
MAINTENANCE
BATTERY REPLACEMENT
When the low battery indicator “ ” is displayed in the CH section of the LCD display, it
indicates that the current channel sensor battery power give wireless sensor shown is low
respectively. Please replace them with new batteries.
TROUBLESHOOT
Problems Solution
Indoor wireless
sensor is intermittent
or no connection
1. Make sure the sensor is within the transmission range.
2. Make sure the channel displayed matches to the channel
selection on the sensor
3. If it still does not work, reset the sensor and resynchronise with
the
console.
No WI-FI connection
1. Check for the WI-FI symbol on the display, it should be always on.
2. Make sure you connect to the
2.4G band but not the 5G band of
your WI-FI router.
Temperature or
humidity not accurate
1. Do not place your console or sensor close to a heat source
2.
If the sensor is still not accurate adjust the value in calibration mode.
SPECIFICATIONS
CONSOLE
General Specication
Dimensions (W x H x D) 130 x 112 x 27.5mm (5.1 x 4.4 x 1.1 in)
Weight 220g (with batteries)
Main power DC 5V, 1A adaptor
Backup battery CR2032
Operating temperature range -5˚C ~ 50˚C
Operating Humidity range 10~90% RH
Support sensors
- 1 Wireless Thermo-hygro sensors (included)
- Support Up to 7 Wireless Thermo-hygro sensors (optional)
RF frequency
(Depend on country version)
917Mhz (AU version)
Time Related Function Specication
Time display HH: MM
Hour format 12hr AM / PM or 24 hr
Date display DD / MM or MM / DD
Time synchronize method Through the server to get the local time of the console location
Weekday languages EN / DE / FR / ES / IT / NL / RU
In Temperature
Temperature unit °C and °F
Accuracy
<0°C or >40°C ± 2°C (<32°F or >104°F ± 3.6°F)
0~40°C ±1°C (32~104°F ± 1.8°F)
Resolution °C / °F (1 decimal place)
To Next Page
Loading...
Need help?
General
