HT25 - LUBRICATION
67
HYDRAULICS
HT25 - LUBRICATION
67
HYDRAULICS
Hydraulic Oil
Check
With frame level and digging boom fully raised, check oil at sight
glass (2) every 10 hours.
Add THF at fill (3) as necessary. Clean dust from cap by blowing
with low-pressure air.
Change
Change oil filter at 50 hours and every 250 hours thereafter.
Drain hydraulic oil (1), change filter (4), and refill with THF every
1000 hours. Change oil and filter every 500 hours if jobsite
temperature exceeds 100°F (38°C) more than 50% of the time.
Hydraulic Oil
Check
With frame level and digging boom fully raised, check oil at sight
glass (2) every 10 hours.
Add THF at fill (3) as necessary. Clean dust from cap by blowing
with low-pressure air.
Change
Change oil filter at 50 hours and every 250 hours thereafter.
Drain hydraulic oil (1), change filter (4), and refill with THF every
1000 hours. Change oil and filter every 500 hours if jobsite
temperature exceeds 100°F (38°C) more than 50% of the time.