Service - 162 RT80Q Operator’s Manual
100 HOUR
100 HOUR
Tractor
Change Engine Oil and Filter (Initial)
Change engine oil and filter after first 100 hours
of operation. Oil capacity is 8 qts (7.6 L).
To change:
1. While oil is warm, remove drain plug (1).
Drain oil and replace plug.
2. Remove filter (2) and replace with new filter
each time oil is changed. Add DEO at fill (3).
Location Task Notes
TRACTOR Change engine oil and filter DEO, initial
Check track tension
Check track hub bolts 295 ft•lb (400 N•m).
Inspect track rollers and sprocket
PLOW Check plow shear mounts
Test plow connector pivots
NOTICE:
• Regular oil change interval is 500 hours only if using John Deere Plus-50
®
or ACEA E4/E5.
• Oil change interval is 250 hours when using alternative oils meeting API service classifications CI-4,
CH-4, or ACEA E3.
• See "Recommended Lubricants" for more information about DEO specifications.
t33om048w.eps
1
2
3
To Next Page
Loading...
Need help?
General
