To Next Page

To Previous Page

DJI Action 2 User Manual

Accessories

DJI Action 2 Front Touchscreen Module

1. Lock Clip

2. Microphone

3. Status LED

4. microSD Card Slot

5. Lock Hole

6. Power/Record Button

7. Speaker

8. Expansion Port

9. Front Screen

10. USB-C Charging Port

The front touchscreen module can be magnetically attached to the camera unit. Make sure the

expansion ports are properly aligned before attaching the magnetic lock clips to the magnetic lock

holes on the camera unit and press both clips before removing.

Other manuals for dji ACTION 2

Questions and Answers:

Need help?

Do you have a question about the dji ACTION 2 and is the answer not in the manual?

General

Flip-out screen	-
Built-in display	Yes
Display diagonal	1.76 \
Display resolution	446 x 424 pixels
Product color	Gray
Waterproof up to	10 m
Protection features	Waterproof
Audio recording formats	AAC
Sensor type	CMOS
Total megapixels	12 MP
Optical sensor size	1/1.7 \
Image formats supported	JPEG, RAW
Maximum image resolution	4000 x 3000 pixels
Digital zoom	4 x
Fixed aperture	2.8 mm
Field of view (FOV) angle	155 °
ISO sensitivity	100, 6400
Fastest camera shutter speed	1/8000 s
Slowest camera shutter speed	30 s
Aspect ratio	4:3, 16:9
Video resolutions	1920 x 1080, 2688 x 1512, 3840 x 2160 pixels
Maximum frame rate	120 fps
Supported video modes	1080p
Video formats supported	H.264, HEVC, MP4
Maximum video resolution	4096 x 3072 pixels
Bitrate at maximum video resolution	130 Mbit/s
Storage media	Internal memory
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	256 GB
Battery voltage	3.85 V
Battery capacity	580 mAh
Battery life (max)	1.1 h
Operating temperature (T-T)	0 - 40 °C
Frequency band	2.400 - 5.850 GHz
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0