dji RC 2 User Manual

DJI RC 2
User Manual
16
©
2023 DJI All Rights Reserved.
Remote Controller LEDs
Status LED
Blinking Pattern Descriptions
— Solid red Disconnected from the aircraft.
Blinking red The battery level of the aircraft is low.
— Solid green Connected with the aircraft.
Blinking blue The remote controller is linking to an aircraft.
— Solid yellow Firmware update failed.
— Solid blue Firmware update successful.
Blinking yellow The battery level of the remote controller is low.
Blinking cyan Control sticks not centered.
Battery Level LEDs
Blinking Pattern Battery Level
76%-100%
51%-75%
26%-50%
0%-25%
Remote Controller Alert
The remote controller beeps when there is an error or warning. Pay attention when prompts
appear on the touchscreen or in DJI Fly. Slide down from the top of the screen and select Mute
to disable all alerts, or slide the volume bar to 0 to disable some alerts.
The remote controller sounds an alert during RTH. The alert cannot be canceled. The remote
controller sounds an alert when the battery level of the remote controller is low (6% to10%). A
low battery level alert can be canceled by pressing the power button. The critical low battery
level alert, which is triggered when the battery level is less than 5%, cannot be canceled.
• Fully charge the remote controller before each ight. The remote controller sounds an
alert when the battery level is low.
• If the remote controller is powered on and not in use for five minutes, an alert will
sound. After six minutes, the remote controller automatically powers off. Move the
control sticks or press any button to cancel the alert.

dji RC 2 Specifications

General

Brand	dji
Model	RC 2
Category	Drone & Quadcopter Accessories
Language	English