Using the toilet CT4000
24
6.5 Draining the cassette tank
Empty the cassette tank when the indicator lights up.
➤ Remove the cassette tank (chapter “Removing the cassette tank” on page 22).
➤ Press the release button in the middle of the handle and pull the handle out to its
end position (fig. 9, page 7).
A
➤ Bring the tank to the nearest designated disposal location.
➤ Press the release button in the middle of the handle and push the handle back
into the cassette.
➤ Set the cassette tank upright and rotate the drain pipe 90° upward (fig. 4,
page 4).
I
➤ Twist off the cap (fig. 5, page 5).
➤ Hold the cassette tank by the handle with one hand (fig. 0 3, page 7) and
with the other hand on the slider (fig. 0 2, page 7), so that you can push the
vent button (fig. 0 1, page 7) while it is draining.
➤ Press the vent button when the drain pipe points downwards.
✓ The tank drains steadily and without splashing.
➤ After draining, rinse out the cassette tank carefully.
➤ Add a sanitary additive to the cassette (chapter “Adding sanitary additive” on
page 22).
➤ Clear away course dirt from the wheels of the cassette tank to prevent scratching
of the cassette housing.
NOTICE!
• Do not shake the cassette tank vigorously.
• Do not hang the cassette tank on a bicycle or other vehicle for trans-
portation.
• Do not place heavy objects on the cassette tank during transport.
This can damage the housing and rollers.
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come
off.
CT4000-O-18s.book Seite 24 Dienstag, 2. Mai 2017 7:15 19