HB2500
6
Operating instructions for users
GB
1.4. User tips
The machine performance can be improved by taking some precau-
tions.
Improve the vehicle’s heat insulation by eliminating openings and
covering the glass surface with refl ecting curtains.
Avoid frequently opening doors and windows when not necessary.
Select the appropriate temperature and fan speed. Direct the air
vents suitably.
In order to avoid machine malfunctioning and risks of injury, take the
following precautions:
Do not obstruct the ventilation air inlet and outlet with cloth, paper or
any other items;
do not put your hands or any other items into the openings;
do not spray water inside the machine;
keep fl ammable substances well away from the machine.
Clean the air fi lter periodically.
•
•
•
•
•
•
•
•
•
Selecting functional status
At the time of switching on, the system waits for a few min-
utes before operating the compressor.
Press the “MODE” button to move between the possible states
(automatic, cold, dehumidifi cation, ventilation, heat pump) and
wait two seconds on the selected state for this to be confi rmed
by the system with an audible warning (the buzzer is inside the
machine). Always point the remote control towards the receiver
to send all the signals.
1.5.Description of the controls
1 General information
on/off
fan speed
change
mode
(MODE)
automatic
mode
temperature
selection -
temperature
selection +
cold mode
Set Point
heat pump mode
dehumidifi cation
mode
ventilation
mode
clock
timer off
timer on
clock setting
night
mode
fan speed
function not pro-
grammed
X= no function
no function: it can be used to send the
information back to the receiver
To Next Page
Loading...
Need help?
General
