2
EN
Contents MasterFlush 7600 Series Toilet
1 Explanation of Symbols and Safety
Instructions ............................ 2
1.1 Recognize Safety Information .............2
1.2 Understand Signal Words ................2
1.3 Supplemental Directives .................2
1.4 General Safety Messages ................3
2 General Information ..................... 3
2.1 Model Identification ....................4
2.2 Component Locations. . . . . . . . . . . . . . . . . . .4
3 Intended Use ........................... 5
4 Specifications .......................... 5
4.1 Component Materials ...................5
4.2 Installation Requirements ................5
4.3 Toilet Dimensions ......................6
4.4 Rough-In Dimensions ...................6
5 Wiring Diagram ......................... 7
6 Installation ............................. 7
6.1 Preparing to Install the Toilet .............7
6.2 Removing an Existing Toilet ..............7
6.3 Installing the Toilet .....................8
7 Operation ............................. 10
7.1 Adding Water to the Bowl ...............10
7.2 Flushing the Toilet ..................... 11
7.3 Changing the Flush Settings ............. 11
7.4 Understanding the Full Tank Indicator ..... 11
8 Maintenance ...........................11
8.1 Cleaning ............................ 11
8.2 Routine Maintenance ..................12
8.3 Winterizing ..........................12
9 Troubleshooting ....................... 13
10 Disposal .............................. 13
11 Warranty Information ................... 13
Contents
Service Center & Dealer Locations
Visit: www.dometic.com
Read these instructions carefully. These instructions
MUST stay with this product.
1 Explanation of Symbols and
Safety Instructions
This manual has safety information and instructions to
help you eliminate or reduce the risk of accidents and
injuries.
1.1 Recognize Safety Information
This is the safety alert symbol. It is used to alert
you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
1.2 Understand Signal Words
A signal word will identify safety messages and property
damage messages, and also will indicate the degree or
level of hazard seriousness.
DANGER!
Indicates a hazardous situation that, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE: Used to address practices not related to
physical injury.
I
Indicates additional information that is not related
to physical injury.
1.3 Supplemental Directives
To reduce the risk of accidents and injuries, please
observe the following directives before proceeding to
install, operate, or service this appliance:
• Read and follow all safety information and
instructions.