11
EN
Flush Controls
Understanding the indicator lights
Indicator Light Status
Power on Steady green Electrical power to the toilet is
activated
Flashing green Flush mode is changing
Tank level Amber The holding tank is 75% full
Red The holding tank is 100% full*
*Flush actuation is disabled to prevent overfilling the holding tank
7.3 Changing flush modes (4000 and 8000 Series)
➤ Press and hold the Flush button for approximately five seconds to toggle between normal
and dry bowl mode.
➤ Release the Flush button when the OK TO FLUSH or POWER light begins flashing.
Flush modes Action
Water used per
flush (4000 Series)
Water used per
flush (8000 Series)
Normal Adds water to the bowl
aer every flush
1 quart (0.95 liters) 0.85 gal. (3.2 liters)
Dry bowl Does not add water to the
bowl aer every flush
1 pint (0.5 liters) .45 gal (1.7 liters)
To Next Page
Loading...
Need help?
General
