16 Dräger Alcotest 5510
Technical data
9 Technical data
Measuring principle Electrochemical Sensor
Measuring range
Breath alcohol
concentration
0.00 to 2.5 mg/L
0 to 2500 µg/L
0.000 to 0.500 g/210L
0 to 250 µg/100mL
0 to 250 µg%
(Ethanol mass per breath volume at
34 °C and 1013 hPa.)
Blood alcohol
concentrat
ion
0.00 to 5.00 ‰
0.000 to 0.500 %
0.00 to 5.00 g/L
0 to 500 mg/10
0 mL
0 to 500 mg%
0.00 to 5.00 mg/mL
(Ethanol mass per blood volume
resp. mass at 20 °C and 1013 hPa.
By giving this data a conversion
factor of 2100 between breath and
blood alcohol concentrations is
used.)
Display range
The range of indication and the measuring range are identical.
If the result is exceeding the measuring range the display will show
three arrows " " as overflow indication.
Ambient conditions
For operation –5 to +50 °C (23 to 122 °F)
10 to 100 % r.h.
(non condensing)
600 to 1400 hPa
For storage –40 to +65 °C (–40 to 149 °F)
Sample conditions
minimal blowing time selectable
2 s default
minimal volume selectable
1.2 L default
Measurement accuracy
Reproducibility with an ethanol standard
up to 0.50 mg/L 0.008 mg/L
≥
0.50 mg/L 1.7 % of measured value
up to 0.100 % 0
.0017 %
≥ 0
.100 % 1.7 % of measured value
Va
lues for other units of measure can be calculated accor
ding to
table on page 16.
To Next Page
Loading...
Need help?
General
