Dräger Alcotest 7000 User Manual

Technical data |
Dräger Alcotest
®
7000 27
9 Technical data
Measurement principle Electrochemical sensor
Measuring range
Breath alcohol concen-
tration
0.00 to 3.00 mg/L (mass of alcohol
per minimum volume of breath at
34°C and 1013 hPa)
Blood alcohol concen-
tration
0.00 to 6.00‰ (mass of alcohol per
blood volume or mass of blood at
20°C and 1013 hPa)
A conversion factor of 2100 is used to calculate the blood alcohol
concentration using the breath alcohol concentration data (factory
setting, country-specific conversion factors can be configured).
Measuring units
Mg/L, μg/100 mL, μg%, μg/L, g/210 L, g/L, ‰, %, mg/100 mL,
mg%, mg/mL
Ambient conditions
During operation –10 to +55 °C
10 to 100 % r.h. (non-condensing)
600 to 1300 hPa
In storage –20 to +60 °C
15 to 75 % r.h. (10 to 100 % r.h. <48
h)
Data storage
Up to 30,000 tests (depending on the
configuration)
Warning that data storage is almost full
at 90 %
Default: FIFO (oldest test is overwrit-
ten)
Optional: Device locks at 100 %
Sampling
Minimum volume of
breath
>1.2 L (default setting)
Breath flow >10 L/min (default setting)

Dräger Alcotest 7000 Specifications

General

Brand	Dräger
Model	Alcotest 7000
Category	Test Equipment
Language	English