11
How to Use
Setting Language
Note: Stop the vacuum at any time while cleaning. It will continue to use the last selected
suction level when starting again.
Switching Suction Level
Press the button to switch between four suction levels of auto, eco, med and turbo. The
corresponding suction level will be highlighted on the display screen.
The color of dust level indicator change with the amount of inhaled dust. When the
smart multi-brush bar is attached, the vacuum will automatically switch the suction level
between the oor/tile and the carpet.
Press and hold the button for 3 seconds to enter the menu interface. Click the button
to swtich to "Language". Press the button for 1 second to enter the language selection
interface. Click to scroll through the language list, select a language, and then press
and hold for 3 seconds to save your setting.
Cleaning Record
Press and hold the button for 3 seconds to enter the manu interface. Click the button
to swtich to "Cleaning Record" and press the button for 1 second to enter the cleaning
record interface. Then you will see the cleaning recorad of the last 7 days.
• The display screen will return to the main page if there is no operation for more than 15 seconds.
• To exit the menu interface, click the button to select "Exit".
Note:
EN
To Next Page
Loading...
Need help?
General
